есть Alcatel OXE и к ней по E1 при помоши PCI-платы Digium TE122 подключается Asterisk (Trixbox). на Alcatel OXE выход на Asterisk осуществляется по 0 (т.е. 0 выход на транковую группу и далее номер абонента). При звонке с Alcatel OXE на asterisk, например номер 03001 (3001 - абонент asterisk), в трубке молчание и через секунд 30 короткие гудки, а знонки с asterisk'а на Alcatel OXE проходят нормально. в консолях Alcatel OXE и asterisk пришут об отсутствии обязательной информации

лог Alcatel OXE:

(1)xa000000> t3
--> Cleaning mtracer...
--> Positionning t3 filters...
+--------+-------+--------+--------+---------+---------+----------+------+
| filter | desti | src_id | cr_nbr | cpl_nbr | us_term | term_nbr | type |
+--------+-------+--------+--------+---------+---------+----------+------+
| 0 | ** | ** | * | ** | * | *** | 165 |
| 1 | ** | ** | * | ** | * | *** | 166 |
| 2 | ** | ** | * | ** | * | *** | 167 |
| 3 | | | | | | | |
| 4 | | | | | | | |
| 5 | | | | | | | |
| 6 | | | | | | | |
| 7 | | | | | | | |
+--------+-------+--------+--------+---------+---------+----------+------+
Traces Analyser activated

mtracer started ...
(358782:000001) MTRACER host (192.168.158.12, xa000000), version: R7.1-f5.401-21-f-ru-c6s2
(358782:000001) MTRACER num: 016, time: 2009/04/13 13:07:49, loss: 0%
______________________________________________________________________________
| (358927:000002) 1117: Send_IO1 (link-nbr=26, sapi=0, tei=0) :
| long: 45 desti: 0 source: 15 cryst: 0 cpl: 26 us: 8 term: 1 type a5
| tei: 0 <<<< message sent : SETUP [05] Call ref : 01 01
|______________________________________________________________________________
|
| IE:[04] BEARER_CAPABILITY (l=3) 80 90 a3
| IE:[6c] CALLING_NUMBER (l=8) -> 01 81 Num : 202420
| IE:[70] CALLED_NUMBER (l=5) -> 81 Num : 3001
| IE:[7d] HLC (l=2) 91 81
| [a1] Sending complete
|______________________________________________________________________________

______________________________________________________________________________
| (358927:000003) Physical-Event :
| long: 22 desti: 0 source: 0 cryst: 0 cpl: 26 us: 0 term: 1 type a5
| tei: 0 >>>> message received : REL COMP [5a] Call ref : 81 01
|______________________________________________________________________________
|
| IE:[08] CAUSE (l=2) 81 e0 -> [e0] MANDATORY INFORMATION ELEMENT MISSING
|______________________________________________________________________________

______________________________________________________________________________
| (358942:000004) Physical-Event :
| long: 54 desti: 0 source: 0 cryst: 0 cpl: 26 us: 0 term: 0 type a5
| tei: 0 >>>> message received : SETUP [05] Call ref : 00 81
| SENDING COMPLETE
|______________________________________________________________________________
|
| IE:[04] BEARER_CAPABILITY (l=3) 80 90 a3
| IE:[18] CHANNEL (l=3) a1 83 82 -> T2 : B channel 2 preferred
| IE:[6c] CALLING_NUMBER (l=12) -> 21 83 Num : 9374043068
| IE:[70] CALLED_NUMBER (l=5) -> a1 Num : 2421
| IE:[7d] HLC (l=2) 91 81
|______________________________________________________________________________

______________________________________________________________________________
| (358942:000005) 1097: Send_IO1 (link-nbr=26, sapi=0, tei=0) :
| long: 23 desti: 0 source: 15 cryst: 0 cpl: 26 us: 8 term: 0 type a5
| tei: 0 <<<< message sent : CALL PROC (02) Call ref : 80 81
|______________________________________________________________________________
|
| IE:[18] CHANNEL (l=3) a9 83 82 -> T2 : B channel 2 exclusive
|______________________________________________________________________________

______________________________________________________________________________
| (358942:000006) 1097: Send_IO1 (link-nbr=26, sapi=0, tei=0) :
| long: 22 desti: 0 source: 15 cryst: 0 cpl: 26 us: 8 term: 0 type a5
| tei: 0 <<<< message sent : ALERT (01) Call ref : 80 81
|______________________________________________________________________________
|
| IE:[1e] PROGRESS_ID (l=2) 81 88
|______________________________________________________________________________


(1)xa000000>


лог Asterisk:

trixbox2*CLI>
< Protocol Discriminator: Q.931 (8) len=32
< Call Ref: len= 2 (reference 254/0xFE) (Originator)
< Message type: SETUP (5)
< [04 03 80 90 a3]
< Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Speech (0)
< Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16)
< User information layer 1: A-Law (35)
< [6c 08 01 81 32 30 32 34 32 30]
< Calling Number (len=10) [ Ext: 0 TON: Unknown Number Type (0) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1)
< Presentation: Presentation permitted, user number passed network screening (1) '202420' ]
< [70 05 81 33 30 30 31]
< Called Number (len= 7) [ Ext: 1 TON: Unknown Number Type (0) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) '3001' ]
< [7d 02 91 81]
< IE: High-layer Compatibility (len = 4)
< [a1]
< Sending Complete (len= 1)
-- Making new call for cr 254
-- Processing Q.931 Call Setup
-- Processing IE 4 (cs0, Bearer Capability)
-- Processing IE 108 (cs0, Calling Party Number)
-- Processing IE 112 (cs0, Called Party Number)
-- Processing IE 125 (cs0, High-layer Compatibility)
-- Processing IE 161 (cs0, Sending Complete)
> Protocol Discriminator: Q.931 (8) len=9
> Call Ref: len= 2 (reference 254/0xFE) (Terminator)
> Message type: RELEASE COMPLETE (90)
> [08 02 81 e0]
> Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: Private network serving the local user (1)
> Ext: 1 Cause: Mandatory information element is missing (96), class = Protocol Error (e.g. unknown message) (6) ]
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null
NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null

В TG B-channal в YES пробовали ставить?

проблема решилась в настройках платы PRI Alcatel network mode в no и соответственно аналогично в asterisk'е. но теперь ожидание долгое после набора номера, т.е. набираю 03001 десять секунд ждёт а потом идет звонок

С Owerlap-ом поэксперементируйте или с ARS

JKS Написал:
-------------------------------------------------------
> С Owerlap-ом поэксперементируйте или с ARS

у меня выход на транк в prefix plan стоит как professional trunk seize. в настройках TG overlap dialing ставил в YES и NO результат одинаковый: десять секунд ждет а потом идет звонок. а с ARS как покрутить у меня там пусто?

вот лог звонка с этой задержкой



(1)xa000000> t3
--> Cleaning mtracer...
--> Positionning t3 filters...
+--------+-------+--------+--------+---------+---------+----------+------+
| filter | desti | src_id | cr_nbr | cpl_nbr | us_term | term_nbr | type |
+--------+-------+--------+--------+---------+---------+----------+------+
| 0 | ** | ** | * | ** | * | *** | 165 |
| 1 | ** | ** | * | ** | * | *** | 166 |
| 2 | ** | ** | * | ** | * | *** | 167 |
| 3 | | | | | | | |
| 4 | | | | | | | |
| 5 | | | | | | | |
| 6 | | | | | | | |
| 7 | | | | | | | |
+--------+-------+--------+--------+---------+---------+----------+------+
Traces Analyser activated

mtracer started ...
(450015:000001) MTRACER host (192.168.158.12, xa000000), version: R7.1-f5.401-21-f-ru-c6s2
(450015:000001) MTRACER num: 017, time: 2009/04/13 15:39:52, loss: 0%
______________________________________________________________________________
| (450071:000002) Physical-Event :
| long: 22 desti: 0 source: 0 cryst: 0 cpl: 26 us: 0 term: 0 type a5
| tei: 0 >>>> message received : DISCONNECT [45] Call ref : 00 6a
|______________________________________________________________________________
|
| IE:[08] CAUSE (l=2) 80 90 -> [90] NORMAL CALL CLEARING
|______________________________________________________________________________

______________________________________________________________________________
| (450089:000003) 1117: Send_IO1 (link-nbr=26, sapi=0, tei=0) :
| long: 22 desti: 0 source: 15 cryst: 0 cpl: 26 us: 8 term: 0 type a5
| tei: 0 <<<< message sent : DISCONNECT [45] Call ref : 80 6c
|______________________________________________________________________________
|
| IE:[08] CAUSE (l=2) 81 9b -> [9b] DESTINATION OUT OF ORDER
|______________________________________________________________________________

______________________________________________________________________________
| (450089:000004) 1117: Send_IO1 (link-nbr=26, sapi=0, tei=0) :
| long: 22 desti: 0 source: 15 cryst: 0 cpl: 26 us: 8 term: 0 type a5
| tei: 0 <<<< message sent : RELEASE [4d] Call ref : 80 6a
|______________________________________________________________________________
|
| IE:[08] CAUSE (l=2) 81 90 -> [90] NORMAL CALL CLEARING
|______________________________________________________________________________

______________________________________________________________________________
| (450089:000005) Physical-Event :
| long: 18 desti: 0 source: 0 cryst: 0 cpl: 26 us: 0 term: 0 type a5
| tei: 0 >>>> message received : RELEASE [4d] Call ref : 00 6c
|______________________________________________________________________________

______________________________________________________________________________
| (450089:000006) 1117: Send_IO1 (link-nbr=26, sapi=0, tei=0) :
| long: 22 desti: 0 source: 15 cryst: 0 cpl: 26 us: 8 term: 0 type a5
| tei: 0 <<<< message sent : REL COMP [5a] Call ref : 80 6c
|______________________________________________________________________________
|
| IE:[08] CAUSE (l=2) 81 90 -> [90] NORMAL CALL CLEARING
|______________________________________________________________________________

______________________________________________________________________________
| (450090:000007) Physical-Event :
| long: 18 desti: 0 source: 0 cryst: 0 cpl: 26 us: 0 term: 0 type a5
| tei: 0 >>>> message received : REL COMP [5a] Call ref : 00 6a
|______________________________________________________________________________

______________________________________________________________________________
| (450157:000008) 1117: Send_IO1 (link-nbr=26, sapi=0, tei=0) :
| long: 49 desti: 0 source: 15 cryst: 0 cpl: 26 us: 8 term: 1 type a5
| tei: 0 <<<< message sent : SETUP [05] Call ref : 01 29
|______________________________________________________________________________
|
| IE:[04] BEARER_CAPABILITY (l=3) 80 90 a3
| IE:[18] CHANNEL (l=3) a9 83 97 -> T2 : B channel 23 exclusive
| IE:[6c] CALLING_NUMBER (l=8) -> 01 81 Num : 202420
| IE:[70] CALLED_NUMBER (l=5) -> 81 Num : 3001
| IE:[7d] HLC (l=2) 91 81
|______________________________________________________________________________

______________________________________________________________________________
| (450157:000009) Physical-Event :
| long: 23 desti: 0 source: 0 cryst: 0 cpl: 26 us: 0 term: 1 type a5
| tei: 0 >>>> message received : CALL PROC (02) Call ref : 81 29
|______________________________________________________________________________
|
| IE:[18] CHANNEL (l=3) a9 83 97 -> T2 : B channel 23 exclusive
|______________________________________________________________________________

______________________________________________________________________________
| (450157:000010) Physical-Event :
| long: 22 desti: 0 source: 0 cryst: 0 cpl: 26 us: 0 term: 1 type a5
| tei: 0 >>>> message received : ALERT (01) Call ref : 81 29
|______________________________________________________________________________
|
| IE:[1e] PROGRESS_ID (l=2) 81 88
|______________________________________________________________________________

______________________________________________________________________________
| (450212:000011) Physical-Event :
| long: 22 desti: 0 source: 0 cryst: 0 cpl: 26 us: 0 term: 1 type a5
| tei: 0 >>>> message received : PROGRESS (03) Call ref : 81 29
|______________________________________________________________________________
|
| IE:[1e] PROGRESS_ID (l=2) 81 88
|______________________________________________________________________________


(1)xa000000>

Префикс надо поставить TG overlap, тогда отсылает по 1 цифре

JKS Написал:
-------------------------------------------------------
> Префикс надо поставить TG overlap, тогда отсылает
> по 1 цифре

дело в том что на астериск посылать надо полный номер, а если поставить TG overlap то номер дрнабрать уже не получается... может где есть какой нибудь счётчик времени?

Вот тут всё объяснялось, http://forum.intersyst.ru/read.php?7,11593
ARS префикс отсылает блоком по правилам, описанным в rule, если разрешён ARS естественно.



Редактировано 1 раз. Последний раз 13.05.2009 21:51 пользователем JKS.

спасибо большое за помощь