делаем первое подключение станции,исход идет,при входе получаем 3 цифры,
преобразовываем в номер станции,идет ошибка alert 01 call ref:8068

Приведи трассировку.

Если не помните - включаете в терминальной программе протоколирование и даете команду t3 - что рисует смотрите, многое становится понятно.

бМЕЬМХИ ОКЮМ МСЛЕПЮЖХХ 35-63-30┘43, БМСРПЕММХИ ОКЮМ 2-11-00
| (107300:000947) Physical-Event :
| long: 39 desti: 0 source: 0 cryst: 0 cpl: 0 us: 0 term: 0 type a5
| tei: 0 >>>> message received : SETUP [05] Call ref : 00 6d
| SENDING COMPLETE
|______________________________________________________________________________
|
| IE:[04] BEARER_CAPABILITY (l=3) 80 90 a3
| IE:[18] CHANNEL (l=3) a1 83 94 -> T2 : B channel 20 preferred
| IE:[6c] CALLING_NUMBER (l=2) -> 00 c3 Num :
| IE:[70] CALLED_NUMBER (l=4) -> 81 Num : 332
|______________________________________________________________________________

______________________________________________________________________________
| (107300:000950) 1030: Send_IO1 (link-nbr=0, sapi=0, tei=0) :
| long: 23 desti: 0 source: 15 cryst: 0 cpl: 0 us: 8 term: 0 type a5
| tei: 0 <<<< message sent : CALL PROC (02) Call ref : 80 6d
|______________________________________________________________________________
|
| IE:[18] CHANNEL (l=3) a9 83 94 -> T2 : B channel 20 exclusive
|______________________________________________________________________________

______________________________________________________________________________
| (107300:000951) 1030: Send_IO1 (link-nbr=0, sapi=0, tei=0) :
| long: 22 desti: 0 source: 15 cryst: 0 cpl: 0 us: 8 term: 0 type a5
| tei: 0 <<<< message sent : ALERT (01) Call ref : 80 6d
|______________________________________________________________________________
|
| IE:[1e] PROGRESS_ID (l=2) 81 88
|______________________________________________________________________________

______________________________________________________________________________
| (107301:000958) Physical-Event :
| long: 26 desti: 0 source: 0 cryst: 0 cpl: 0 us: 0 term: 0 type a5
| tei: 0 >>>> message received : STATUS [7d] Call ref : 00 6d
|______________________________________________________________________________
|
| IE:[08] CAUSE (l=3) 82 e4 1e -> [e4] INVALID INFORMATION ELEMENT CONTENTS
| IE:[14] CALL_STATE (l=1) 07
|______________________________________________________________________________

______________________________________________________________________________
| (107301:000959) 1030: Send_IO1 (link-nbr=0, sapi=0, tei=0) :
| long: 22 desti: 0 source: 15 cryst: 0 cpl: 0 us: 8 term: 0 type a5
| tei: 0 <<<< message sent : RELEASE [4d] Call ref : 80 6d
|______________________________________________________________________________
|
| IE:[08] CAUSE (l=2) 81 e4 -> [e4] INVALID INFORMATION ELEMENT CONTENTS
|______________________________________________________________________________

______________________________________________________________________________
| (107301:000960) Physical-Event :
| long: 22 desti: 0 source: 0 cryst: 0 cpl: 0 us: 0 term: 0 type a5
| tei: 0 >>>> message received : REL COMP [5a] Call ref : 00 6d
|______________________________________________________________________________
|
| IE:[08] CAUSE (l=2) 85 e4 -> [e4] INVALID INFORMATION ELEMENT CONTENTS
|______________________________________________________________________________

мЮЯРПНИЙХ:

Board
x x
x Node Number (reserved) : 1 x
x Shelf Address : 0 x
x Board Address : 0 x
x x
x Interface Type + NPRAE x
x Virtual board + NO x
x Serial number : -------------- x
x Usage State + Active x
x Operational State + Enabled x
x Main/Standby State + Main (Master) x
x Number Of Sets Connected : 1 x
x Country Protocol Type + Russia-CIS x
x Incidents Teleservice + YES x
x x
x ISDN Board Layer 2 Parameters x
x x
x Retransmission Timer : 100 x
x TEI Identity Check Timer : 100 x
x Polling Timer : 1000 x
x No. Of Retransmissions : 3 x
x Max Frame Size (Bytes) : 260 x
x x
x Passive board + NO x
x SS7 signaling + NO x
x x
x T2 ISDN Board Layer 2 Parameters x
x x
x Window Size In Frames SAPI S T2 : 7 x
x Window Size In Frames SAPI P T2 : 7

Digital Access
x x
x Node Number (reserved) : 1 x
x Shelf Address : 0 x
x Board Address : 0 x
x T0/T2 Access No. : 0 x
x x
x Access Type + T2 x
x Access Board Type + NPRAE x
x Synchronization Priority : 199 x
x Network Mode + NO x
x Max No Of Used B Channels : 30 x
x Max No. Of Compressed B Channels : 0 x
x Tieline Mode + NO x
x With Alarm + NO x
x Reserved1 + NO x
x Reserved2 + NO x
x Network Date Time Update + NO x
x CRC4 + NO x
x Mu Law for BEARER CAP + NO


: Trunk Groups
x x
x Node Number (reserved) : 1 x
x Trunk Group ID : 0 x
x x
x Trunk Group Type + T2 x
x Trunk Group Name : pri x
x UTF-8 Trunk Group Name : ------------------------------------------- x
x Number Compatible With : 0 x
x Remote Network : 15 x
x Shared Trunk Group + False x
x Special Services + Nothing x
x Node number : 1 x
x Transcom Trunk Group + False x
x Auto.reserv.by Attendant + False x
x Overflow trunk group No. : -1 x
x Tone on seizure + False x
x Private Trunk Group + False x
x Q931 Signal variant + ISDN all countries x
x SS7 Signal variant + No variant x
x Channel selection type + Quantified x
x Auto.DTMF dialing on outgoing call + NO x
x T2 Specification + None x
x Public Network COS : 0 x
x DID transcoding + True x
x Can support UUS in SETUP + True x
x x
x Implicit Priority x
x x
x Activation mode : 0 x
x Priority Level : 0 x
x x
x Preempter + NO x
x Incoming calls Restriction COS : 10 x
x Outgoing calls Restriction COS : 10 x
x Callee number mpt1343 + NO x
x Overlap dialing + YES x
x Call diversion in ISDN + NO x
x x

Trunk Group

x Trunk Group ID : 0 x
x Instance (reserved) : 1 x
x x
x Trunk Group Type + T2 x
x Public Network Ref. : ------ x
x VG for non-existent No. + YES x
x Entity Number : 0 x
x Supervised by Routing + NO x
x VPN Cost Limit for Incom.Calls : 0 x
x Immediate Trk Listening if VPNCall + YES x
x VPN TS % : 50 x
x CSTA-Monitored + NO x
x Max.% of trunks out CCD : 0 x
x Ratio analog.to ISDN cost : ------ x
x TS Distribution on Accesses + YES x
x Quality profile for voice over IP + Profile #1 x
x IP Compression Type + Default x
x Use of volume in system + YES x
x Announcement for dial tone + NO x
x Announcement for Ring tone + NO x
x Private to Public Overflow + YES x
x End-to-end dialing + NO x
x DTMF end-to-end signal. + NO x
x Trunk group used in DISA + NO x
x DISA Secret Code : ---- x
x Routing To Manager + NO x
x Trunk COS : 19 x
x Sending of Progress message + YES x
x No. of digits unused (ISDN) : 0 x
x B Channel Choice + NO x
x Channels: Attendant Control (Rsvd) : 0 x
x Redirection For ACD (Dissuasion) + NO x
x DTO joining + NO x
x Consultation Call On B Channel + NO x
x Automated Attendant + NO x
x Calling party Rights COS : 0 x
x TS Overflow + YES x
x x

T2/T1/T0 Access

x x
x Node Number (reserved) : 1 x
x Trunk Group ID : 0 x
x Instance (reserved) : 1 x

А вы спросите тех, куда вы подключаетесь чем им не нравится Alert с Progress Id. Или могут ли они не посылать сообщение Status в данном случае. Если подключаетесь к станции типа 4400 - этим можно управлять, в System - Reaction Receiving Message State, говорите игнорировать. А по Status, System/ other system/ External signaling param там есть пункт на тему не посылать сообщение Status. И были некоторые патчи где были проблемы c Progress Id. Ну и кроме всего прочего (если звоните сами себе) не задавайте синхронизацию.

было такое с [e4] INVALID INFORMATION ELEMENT CONTENTS

надо зайти в system и поставить ignore на cause