имеет всежая при свежая GD-2
в упор не хочет загружаться, все время крутится по кругу с ребутами

хочу обратить внимание на вот этот кусок лога
------------------------------------------------------------------------------
Flashfx version:700.014.700c
Flash 2Gbit Support activated !!
GC-forced on Soft Error activated !!
NAND Flash Comfiguration:
CPU size : 128 MBytes
free spare blocks: 38
NAND Flash Details:
chip #0 : Type=NAND01GW3B Id=20F1H Size=128(MBytes) Unit size=131072 Page Size=2048
time :sec=58,min=28,hour=16,DoW= 5,date=19,Month= 2,year= 9
time :sec= 2,min=29,hour=16,DoW= 5,date=19,Month= 2,year= 9
------------------------------------------------------------------------------
и как видим что флэш NAND01GW3B таже самая что и писалась тут http://forum.intersyst.ru/read.php?2,9573

уже две ОХО загнулись, на одной ОХО софт перелился и работает, другаю ОХО в упор софт не кладется, а тут еще и GD-2 загнулась


вот полный лог

ShutOK cleared!
Ë‹Alize BIOS Monitor
*** BIOS Version 3EH30227GQAA bios100/010.014 ***
*** Generated on Mar/5/2008 at 14:05 ***
memory test started lng=133169152 with 0
running flash(soldered=1 socket=0)=1,BIOScase:4,BIOSv24:0,verrou=1,algoNOR=1,size=1,base=3FF80000
DIMM characteristics->: JEDEC Manu ID:ê,......
Memory type(EDO,FPM..):0x 4
# of row address:13
# of col address 9
# of module row 1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI:scan_bus for bus 0
PCI:bus=00h,devfn=00h ,[vendor:device]=[1022h/3000h]
PCI:bus=00h,devfn=60h ,[vendor:device]=[100Bh/0020h]
PCI:bus=00h,devfn=98h ,[vendor:device]=[1064h/2101h]
PCI:scan_buses with 00h secondary buses
PCI:command = 3FFH for device 00:00
PCI: Assigning I/O space FC00-FCFF for 00:60 BAR= 10
PCI:Assign memory space BFFFF000H to BFFFFFFFH for device 00:60
PCI:command = 3FFH for device 00:60
PCI:Assign memory space BFFFD000H to BFFFDFFFH for device 00:98
PCI: Assigning I/O space FD00-FD1F for 00:98 BAR= 14
PCI: Unable to handle I/O allocation for 00:98 (FF04) BAR= 18
PCI:command = 3FFH for device 00:98
assigning irq10 to xchange
B0 = 17
DRCTMCTL = 1E
DRCCTL = 8
DBCTL = 11
Set external RTC
Set Internal RTC
No external RTC detected
gpbus sig timing : 0-2-1-2-1-2!

CMOS is available
Xchange PCI mem base OK: 0,mbx= BFFFD000
dsp_accesses.stat_ctrl= FD00
Xchange PCI IO base OK: 0
Xchange irq OK: A
PCI command read for natsemi : 347
PCI Master Bit Setting...
pci_command set to: 357
0 80 9F 81 67 4E ,IRQ 12.on interrupt pin:2
eth0: Transceiver status 0x 7869 advertising 5E1
Flashfx version:700.014.700c
Flash 2Gbit Support activated !!
GC-forced on Soft Error activated !!
NAND Flash Comfiguration:
CPU size : 128 MBytes
free spare blocks: 38
NAND Flash Details:
chip #0 : Type=NAND01GW3B Id=20F1H Size=128(MBytes) Unit size=131072 Page Size=2048
time :sec=58,min=28,hour=16,DoW= 5,date=19,Month= 2,year= 9
time :sec= 2,min=29,hour=16,DoW= 5,date=19,Month= 2,year= 9

ALIZE informations :
Memory Detected : 131072 Ko
Flash Detected
DaughterBoard Detected
DSP Voip Found : 1
XCHANGE Detected
XCHANGE Chip Initialization OK
Ethernet Found : 1
Ethernet Chip Initialization OK
Hard Disk Not Detected
PCM11 selected
CPU at 133 mhz
check lock RTC
value of DIL switch 2


YOU CAN strike Ctrl B to enter in BIOS monitor during several seconds from NOW !

BATMODE testing
Static Boot from hard disk #0(3)
unable to boot on DISK
Static Boot from No Boot Device selected(0)
Static Boot from flash NAND mother(1)

BOOT Sector Found on NAND Flash Drive #0
Shutdown of the interface 0 = 0
init ethernet interface 1 not done
Watch dog started
Linux version 2.2.18-rtl (che_int@csbu176) (gcc version 2.95.2 19991024 (release)) #1 Tue Mar 25 20:36:39 IST 2008
Calibrating delay loop... 65.74 BogoMIPS
Memory: 122804k/131072k available (644k kernel code, 408k reserved, 1584k data, 36k init)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
ShutOK cleared!
Dentry hash table entries: 16384 (order 5, 128k)
Buffer cache hash table entries: 131072 (order 7, 512k)
Page cache hash table entries: 32768 (order 5, 128k)
CPU: AMD 486 DX/4-WB stepping 04
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
TCP: Hash tables configured (ehash 131072 bhash 65536)
802.1Q VLAN Support v1.0 (c) 2000 Ben Greear (GPL)
vlan Initialization complete.
Starting kswapd v 1.5
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
RAM disk driver initialized: 16 RAM disks of 20480K size
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 36k freed
Warning: unable to open an initial console.
Initial console created for init
RTLinux Extensions Loaded (http://www.fsmlabs.com/)
Starting watchdog timer daemon using /dev/rtf3
modprobe: modprobe: Can't locate module char-major-4
INIT: version 2.78 booting
Remounting root read-write....
modprobe: modprobe: Can't locate module char-major-4
e-mgd board found - setting up ramdisk

Remount - Forces the media to be remounted
Datalight FlashFx
V4.06.500 Back ported to OmniPCX MediaGateway
Copyright (c) 1993-2005
Patent US#5860082

Disk Remounted
e2fsck 1.19, 13-Jul-2000 for EXT2 FS 0.5b, 95/08/09
/dev/fla: clean, 162/30360 files, 13758/121396 blocks
/dev/fla on /mnt/flash type ext2 (rw)
Set initial public keys
/mnt/flash/local/ifcfg-eth0: OK
Find ip configuration in /mnt/flash/local/
/mnt/flash/local/startup.cfg: OK
INIT: Entering runlevel: 3 in
Trying to map the io space of the board(=1). Wait 10 sec...
Compression daughter board type [MADA]
mada_1 DSP daughter board
e-MGD version 43.24
Media Gateway Software R8.0 loading ...

No password file found - using default password list
Duplex mode : auto-negociation
Starting /etc/rcS.d/01fifos
Starting /etc/rcS.d/05syslog
Starting /etc/rcS.d/10network
Starting /etc/rcS.d/90init

BIOS updater is now working ... getting current version information
Check if we need to update with bios 3EH30227GQAA bios100/010.014 ...

Reboot after bios update is enabled...

----- RetrieveFlashNorInfo -----
NOR VERSION : Bios Version in soldered NOR flash : 3EH30227GQAA bios100/010.014 len = 28
- Flash Nor Informations -
Flash AMD
Size : 512 Kbytes
Number of sectors : 11


----- CompareBiosVersions -----

CURRENT=010.014 FILE=0eth0 : chip revision 0403.
10.014


*******************************
* NO bios Update is necessary *
*******************************
Basic registers of MII PHY #1: 3100 786d 2000 5c21 05e1 45e1 0007 2801.
Link status: active.

Authentification lanpbx FAILED --> see /var/log/init

Loading modules - please wait ...
watchdogd now in real time mode
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp.c : 156] DSP download failed [-1]
DSP Init error -4
Unable to handle kernel NULL pointer dereference at virtual address 00000000
current->tss.cr3 = 05523000, %cr3 = 05523000
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<c88e08fc>]
EFLAGS: 00010283
eax: 00000000 ebx: c01b9000 ecx: 00000100 edx: c01b9000
esi: 00000000 edi: 00000000 ebp: c5487eac esp: c5487eb4
ds: 0018 es: 0018 ss: 0018
Process modprobe (pid: 582, process nr: 21, stackpage=c5487000)
Stack: c01b9000 00000000 c5487edc c88e53d5 fffffffc 00000003 c88e3059 c0114825
00000200 c01bcd35 c5487eec 00000001 00000000 00000000 c5487efc c88e496a
c88e7288 c01bcd35 c5487f0c c88e6c8b 00000012 00000200 c5487f3c c88e6cf3
Call Trace: [<c88e53d5>] [<c88e3059>] [<c0114825>] [<c88e496a>] [<c88e7288>] [<c88e6c8b>] [<c88e6cf3>]
[<c88e8489>] [<c88e6cc0>] [<c88e3000>] [<c01244ea>] [<c88e3048>] [<c0116df1>] [<c880476a>] [<c88e3048>]
[<c88e0000>] [<c88e3048>] [<c01083e8>]
Code: 8b 00 85 c0 74 04 39 d0 75 f6 39 d0 0f 94 c0 25 ff 00 00 00
watchdogd now in normal mode
RTLinux System Load 1.00
INIT: Switching to runlevel: 6
INIT: Sending processes the TERM signal
Saving e-mgd configuration files ...
Saving System Clock in Hardware Clock ...
No backtrace
Sending all processes the TERM signal...
Sending all processes the KILL signal..
Unmounting file systems
Please stand by while rebooting the system...
Restarting system.
ShutOK cleared!
&Oacute;&#8250;

попытался GD перелить, вот лог апгрейда и 2 перезагрузки

--------------------переливка GD -------------------------------------
&Euml;&#8482;Alize BIOS Monitor
*** BIOS Version 3EH30227GQAA bios100/010.014 ***
*** Generated on Mar/5/2008 at 14:05 ***
memory test started lng=133169152 with 0
running flash(soldered=1 socket=0)=1,BIOScase:4,BIOSv24:0,verrou=1,algoNOR=1,size=1,base=3FF80000
DIMM characteristics->: JEDEC Manu ID:&ecirc;,......
Memory type(EDO,FPM..):0x 4
# of row address:13
# of col address 9
# of module row 1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI:scan_bus for bus 0
PCI:bus=00h,devfn=00h ,[vendor:device]=[1022h/3000h]
PCI:bus=00h,devfn=60h ,[vendor:device]=[100Bh/0020h]
PCI:bus=00h,devfn=98h ,[vendor:device]=[1064h/2101h]
PCI:scan_buses with 00h secondary buses
PCI:command = 3FFH for device 00:00
PCI: Assigning I/O space FC00-FCFF for 00:60 BAR= 10
PCI:Assign memory space BFFFF000H to BFFFFFFFH for device 00:60
PCI:command = 3FFH for device 00:60
PCI:Assign memory space BFFFD000H to BFFFDFFFH for device 00:98
PCI: Assigning I/O space FD00-FD1F for 00:98 BAR= 14
PCI: Unable to handle I/O allocation for 00:98 (FF04) BAR= 18
PCI:command = 3FFH for device 00:98
assigning irq10 to xchange
B0 = 17
DRCTMCTL = 1E
DRCCTL = 8
DBCTL = 11
Set external RTC
Set Internal RTC
No external RTC detected
gpbus sig timing : 0-2-1-2-1-2!

CMOS is available
Xchange PCI mem base OK: 0,mbx= BFFFD000
dsp_accesses.stat_ctrl= FD00
Xchange PCI IO base OK: 0
Xchange irq OK: A
PCI command read for natsemi : 347
PCI Master Bit Setting...
pci_command set to: 357
0 80 9F 81 67 4E ,IRQ 12.on interrupt pin:2
eth0: Transceiver status 0x 7869 advertising 5E1
Flashfx version:700.014.700c
Flash 2Gbit Support activated !!
GC-forced on Soft Error activated !!
NAND Flash Comfiguration:
CPU size : 128 MBytes
free spare blocks: 38
NAND Flash Details:
chip #0 : Type=NAND01GW3B Id=20F1H Size=128(MBytes) Unit size=131072 Page Size=2048
time :sec=15,min=49,hour=16,DoW= 5,date=19,Month= 2,year= 9
time :sec=19,min=49,hour=16,DoW= 5,date=19,Month= 2,year= 9

ALIZE informations :
Memory Detected : 131072 Ko
Flash Detected
DaughterBoard Detected
DSP Voip Found : 1
XCHANGE Detected
XCHANGE Chip Initialization OK
Ethernet Found : 1
Ethernet Chip Initialization OK
Hard Disk Not Detected
PCM11 selected
CPU at 133 mhz
check lock RTC
value of DIL switch 2


YOU CAN strike Ctrl B to enter in BIOS monitor during several seconds from NOW !



hit [Ctrl I] for BIOS monitor!

Password?:


Watchdog disabled
Alize BIOS Monitor
*** BIOS Version 3EH30227GQAA bios100/010.014 ***
*** Generated on Mar/5/2008 at 14:05 ***

Monitor Light Menu

1 - Load From Hdisk #0
2 - Load From Ethernet
3 - Load From Flash NAND program
4 - Load From Flash NAND program and Bootp
5 - Load From Hdisk #0 and Bootp
6 - Display MAC address
7 - Display PCMS id
8 - Display System informations
9 - Full Options menu
10 - Switch console
11 - Reset System

?2
eth0: Setting 1 (0 half 1 full) based on negotiated link capability.

IP address determination
============================

BOOTP request in progress ->0:80:9F:81:67:4E

*RcvTO,TOIPRcv,bp_chaddr(eth client address):0:80:9F:81:67:4E
Bootp resp IP addr src:10.6.2.50
bootp server and TFTP server are the same

TFTP server IP addr ( siaddr): 10.6.2.50
eth source address=0:13:77:2:89:9
bootfile = /DHS3bin/downbin/emg/binmgstart
0:13:77:2:89:9

Netmask: 255.255.255.0
Our Hostname: OXE_1 (10.6.2.3)

Domain name: lcatel.a4400.0&yuml;

My IP address
10.6.2.3
My SUBNET mask
255.255.255.0
TFTPLOAD STARTED using ip=10.6.2.50 -New ethernet address TFTP server (or gateway) :0:13:77:2:89:9
- Bootp Server KHAYBULAEVPC - File Name /DHS3bin/downbin/emg/binmgstart
size of last packet: 141

TFTPLOAD COMPLETE - file size 141
cmd received: /DHS3bin/downbin/emg/binmgvmlinux;772096;BIN;1048576;1048576
/DHS3bin/downbin/emg/binmgrdimg;5726550;RAMDISK;4194304;0
boot;0;BOOT;0;1048576

size of file loaded: 8DH at 6620H
j= 0 file-fct type= 7 ,file name= /DHS3bin/downbin/emg/binmgvmlinux ,length= 772096 ,address=1048576 start=1048576
j= 1 file-fct type= 1 ,file name= /DHS3bin/downbin/emg/binmgrdimg ,length= 5726550 ,address=4194304 start=0
j= 2 file-fct type= 5 ,file name= boot ,length= 0 ,address=0 start=1048576
j= 3 file-fct type= 0 ,file name= ,length= 0 ,address=0 start=0
j= 4 file-fct type= 0 ,file name= ,length= 0 ,address=0 start=0
j= 5 file-fct type= 0 ,file name= ,length= 0 ,address=0 start=0
j= 6 file-fct type= 0 ,file name= ,length= 0 ,address=0 start=0
j= 7 file-fct type= 0 ,file name= ,length= 0 ,address=0 start=0
j= 8 file-fct type= 0 ,file name= ,length= 0 ,address=0 start=0
j= 9 file-fct type= 0 ,file name= ,length= 0 ,address=0 start=0
config action number=3

TFTPLOAD STARTED using ip=10.6.2.50 -New ethernet address TFTP server (or gateway) :0:13:77:2:89:9
- Bootp Server KHAYBULAEVPC - File Name /DHS3bin/downbin/emg/binmgvmlinux
................................................................................
..............size of last packet: 14

TFTPLOAD COMPLETE - file size 772110
WARNING: downloaded size file # from command file

TFTPLOAD STARTED using ip=10.6.2.50 -New ethernet address TFTP server (or gateway) :0:13:77:2:89:9
- Bootp Server KHAYBULAEVPC - File Name /DHS3bin/downbin/emg/binmgrdimg
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
...........................................................size of last packet: 342

TFTPLOAD COMPLETE - file size 5726550
12711=total packets received
12704=total packets transmitted
7085465=total bytes received
814164=total bytes transmitted
0=bad packets received
0=packet transmit problems
0=no space in linux buffers
0=no space available in linux
0=multicast packets received
0=collisions
0=length_errors
0=receiver ring buff overflow
0=recved pkt with crc error
0=recv'd frame alignment error
0=recv'r fifo overrun
0=receiver missed packet
0=tx_aborted_errors
0=tx_carrier_errors
0=tx_fifo_errors
0=tx_heartbeat_errors
0=tx_window_errors
0=rx_compressed
0=tx_compressed
start kernel at 100000
Shutdown of the interface 0 = 0
init ethernet interface 1 not done
Watch dog started
Linux version 2.2.18-rtl (che_int@csbu176) (gcc version 2.95.2 19991024 (release)) #1 Tue Mar 25 20:36:39 IST 2008
Calibrating delay loop... 65.74 BogoMIPS
Memory: 122804k/131072k available (644k kernel code, 408k reserved, 1584k data, 36k init)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
ShutOK cleared!
Dentry hash table entries: 16384 (order 5, 128k)
Buffer cache hash table entries: 131072 (order 7, 512k)
Page cache hash table entries: 32768 (order 5, 128k)
CPU: AMD 486 DX/4-WB stepping 04
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
TCP: Hash tables configured (ehash 131072 bhash 65536)
802.1Q VLAN Support v1.0 (c) 2000 Ben Greear (GPL)
vlan Initialization complete.
Starting kswapd v 1.5
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
RAM disk driver initialized: 16 RAM disks of 20480K size
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 36k freed
Warning: unable to open an initial console.
Initial console created for init
RTLinux Extensions Loaded (http://www.fsmlabs.com/)
Starting watchdog timer daemon using /dev/rtf3
modprobe: modprobe: Can't locate module char-major-4
INIT: version 2.78 booting
Remounting root read-write....
modprobe: modprobe: Can't locate module char-major-4
e-mgd board found - setting up ramdisk

Remount - Forces the media to be remounted
Datalight FlashFx
V4.06.500 Back ported to OmniPCX MediaGateway
Copyright (c) 1993-2005
Patent US#5860082

Disk Remounted
e2fsck 1.19, 13-Jul-2000 for EXT2 FS 0.5b, 95/08/09
/dev/fla: clean, 162/30360 files, 13758/121396 blocks
/dev/fla on /mnt/flash type ext2 (rw)
Set initial public keys
/mnt/flash/local/ifcfg-eth0: OK
Find ip configuration in /mnt/flash/local/
/mnt/flash/local/startup.cfg: OK
INIT: Entering runlevel: 3 in
Trying to map the io space of the board(=1). Wait 10 sec...
Compression daughter board type [MADA]
mada_1 DSP daughter board
e-MGD version 43.24
Media Gateway Software R8.0 loading ...

No password file found - using default password list
Duplex mode : auto-negociation
Starting /etc/rcS.d/01fifos
Starting /etc/rcS.d/05syslog
Starting /etc/rcS.d/10network
Starting /etc/rcS.d/90init

BIOS updater is now working ... getting current version information
Check if we need to update with bios 3EH30227GQAA bios100/010.014 ...

Reboot after bios update is enabled...

----- RetrieveFlashNorInfo -----
NOR VERSION : Bios Version in soldered NOR flash : 3EH30227GQAA bios100/010.014 len = 28
- Flash Nor Informations -
Flash AMD
Size : 512 Kbytes
Number of sectors : 11


----- CompareBiosVersions -----

CURRENT=010.014 FILE=0eth0 : chip revision 0403.
10.014


*******************************
* NO bios Update is necessary *
*******************************
Basic registers of MII PHY #1: 3100 786d 2000 5c21 05e1 45e1 0007 2801.
Link status: active.



Authentification lanpbx FAILED --> see /var/log/init

Loading modules - please wait ...
watchdogd now in real time mode
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp.c : 156] DSP download failed [-1]
DSP Init error -4
Unable to handle kernel NULL pointer dereference at virtual address 00000000
current->tss.cr3 = 05446000, %cr3 = 05446000
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<c88e08fc>]
EFLAGS: 00010283
eax: 00000000 ebx: c01b9000 ecx: 00000100 edx: c01b9000
esi: 00000000 edi: 00000000 ebp: c5487eac esp: c5487eb4
ds: 0018 es: 0018 ss: 0018
Process modprobe (pid: 582, process nr: 21, stackpage=c5487000)
Stack: c01b9000 00000000 c5487edc c88e53d5 fffffffc 00000003 c88e3059 c0114825
00000200 c01bcd35 c5487eec 00000001 00000000 00000000 c5487efc c88e496a
c88e7288 c01bcd35 c5487f0c c88e6c8b 00000012 00000200 c5487f3c c88e6cf3
Call Trace: [<c88e53d5>] [<c88e3059>] [<c0114825>] [<c88e496a>] [<c88e7288>] [<c88e6c8b>] [<c88e6cf3>]
[<c88e8489>] [<c88e6cc0>] [<c88e3000>] [<c01244ea>] [<c88e3048>] [<c0116df1>] [<c880478d>] [<c88e3048>]
[<c88e0000>] [<c88e3048>] [<c01083e8>]
Code: 8b 00 85 c0 74 04 39 d0 75 f6 39 d0 0f 94 c0 25 ff 00 00 00
watchdogd now in normal mode
RTLinux System Load 1.00
INIT: Switching to runlevel: 6
INIT: Sending processes the TERM signal
Saving e-mgd configuration files ...
Saving System Clock in Hardware Clock ...
No backtrace
Sending all processes the TERM signal...
Sending all processes the KILL signal..
Unmounting file systems
Please stand by while rebooting the system...
Restarting system.

-------- первый ребоот ---------------------------------------------------
ShutOK cleared!
&Oacute;&#8250;Alize BIOS Monitor
*** BIOS Version 3EH30227GQAA bios100/010.014 ***
*** Generated on Mar/5/2008 at 14:05 ***
memory test started lng=133169152 with 0
running flash(soldered=1 socket=0)=1,BIOScase:4,BIOSv24:0,verrou=1,algoNOR=1,size=1,base=3FF80000
DIMM characteristics->: JEDEC Manu ID:&ecirc;,......
Memory type(EDO,FPM..):0x 4
# of row address:13
# of col address 9
# of module row 1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI:scan_bus for bus 0
PCI:bus=00h,devfn=00h ,[vendor:device]=[1022h/3000h]
PCI:bus=00h,devfn=60h ,[vendor:device]=[100Bh/0020h]
PCI:bus=00h,devfn=98h ,[vendor:device]=[1064h/2101h]
PCI:scan_buses with 00h secondary buses
PCI:command = 3FFH for device 00:00
PCI: Assigning I/O space FC00-FCFF for 00:60 BAR= 10
PCI:Assign memory space BFFFF000H to BFFFFFFFH for device 00:60
PCI:command = 3FFH for device 00:60
PCI:Assign memory space BFFFD000H to BFFFDFFFH for device 00:98
PCI: Assigning I/O space FD00-FD1F for 00:98 BAR= 14
PCI: Unable to handle I/O allocation for 00:98 (FF04) BAR= 18
PCI:command = 3FFH for device 00:98
assigning irq10 to xchange
B0 = 17
DRCTMCTL = 1E
DRCCTL = 8
DBCTL = 11
Set external RTC
Set Internal RTC
No external RTC detected
gpbus sig timing : 0-2-1-2-1-2!

CMOS is available
Xchange PCI mem base OK: 0,mbx= BFFFD000
dsp_accesses.stat_ctrl= FD00
Xchange PCI IO base OK: 0
Xchange irq OK: A
PCI command read for natsemi : 347
PCI Master Bit Setting...
pci_command set to: 357
0 80 9F 81 67 4E ,IRQ 12.on interrupt pin:2
eth0: Transceiver status 0x 7869 advertising 5E1
Flashfx version:700.014.700c
Flash 2Gbit Support activated !!
GC-forced on Soft Error activated !!
NAND Flash Comfiguration:
CPU size : 128 MBytes
free spare blocks: 38
NAND Flash Details:
chip #0 : Type=NAND01GW3B Id=20F1H Size=128(MBytes) Unit size=131072 Page Size=2048
time :sec=44,min=52,hour=16,DoW= 5,date=19,Month= 2,year= 9
time :sec=47,min=52,hour=16,DoW= 5,date=19,Month= 2,year= 9

ALIZE informations :
Memory Detected : 131072 Ko
Flash Detected
DaughterBoard Detected
DSP Voip Found : 1
XCHANGE Detected
XCHANGE Chip Initialization OK
Ethernet Found : 1
Ethernet Chip Initialization OK
Hard Disk Not Detected
PCM11 selected
CPU at 133 mhz
check lock RTC
value of DIL switch 2


YOU CAN strike Ctrl B to enter in BIOS monitor during several seconds from NOW !

BATMODE testing
Static Boot from hard disk #0(3)
unable to boot on DISK
Static Boot from No Boot Device selected(0)
Static Boot from flash NAND mother(1)

BOOT Sector Found on NAND Flash Drive #0
Shutdown of the interface 0 = 0
init ethernet interface 1 not done
Watch dog started
Linux version 2.2.18-rtl (che_int@csbu176) (gcc version 2.95.2 19991024 (release)) #1 Tue Mar 25 20:36:39 IST 2008
Calibrating delay loop... 65.74 BogoMIPS
Memory: 122804k/131072k available (644k kernel code, 408k reserved, 1584k data, 36k init)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
ShutOK cleared!
Dentry hash table entries: 16384 (order 5, 128k)
Buffer cache hash table entries: 131072 (order 7, 512k)
Page cache hash table entries: 32768 (order 5, 128k)
CPU: AMD 486 DX/4-WB stepping 04
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
TCP: Hash tables configured (ehash 131072 bhash 65536)
802.1Q VLAN Support v1.0 (c) 2000 Ben Greear (GPL)
vlan Initialization complete.
Starting kswapd v 1.5
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
RAM disk driver initialized: 16 RAM disks of 20480K size
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 36k freed
Warning: unable to open an initial console.
Initial console created for init
RTLinux Extensions Loaded (http://www.fsmlabs.com/)
Starting watchdog timer daemon using /dev/rtf3
modprobe: modprobe: Can't locate module char-major-4
INIT: version 2.78 booting
Remounting root read-write....
modprobe: modprobe: Can't locate module char-major-4
e-mgd board found - setting up ramdisk

Remount - Forces the media to be remounted
Datalight FlashFx
V4.06.500 Back ported to OmniPCX MediaGateway
Copyright (c) 1993-2005
Patent US#5860082

Disk Remounted
e2fsck 1.19, 13-Jul-2000 for EXT2 FS 0.5b, 95/08/09
/dev/fla: clean, 162/30360 files, 13758/121396 blocks
/dev/fla on /mnt/flash type ext2 (rw)
Set initial public keys
/mnt/flash/local/ifcfg-eth0: OK
Find ip configuration in /mnt/flash/local/
/mnt/flash/local/startup.cfg: OK
INIT: Entering runlevel: 3 in
Trying to map the io space of the board(=1). Wait 10 sec...
Compression daughter board type [MADA]
mada_1 DSP daughter board
e-MGD version 43.24
Media Gateway Software R8.0 loading ...

No password file found - using default password list
Duplex mode : auto-negociation
Starting /etc/rcS.d/01fifos
Starting /etc/rcS.d/05syslog
Starting /etc/rcS.d/10network
Starting /etc/rcS.d/90init

BIOS updater is now working ... getting current version information
Check if we need to update with bios 3EH30227GQAA bios100/010.014 ...

Reboot after bios update is enabled...

----- RetrieveFlashNorInfo -----
NOR VERSION : Bios Version in soldered NOR flash : 3EH30227GQAA bios100/010.014 len = 28
- Flash Nor Informations -
Flash AMD
Size : 512 Kbytes
Number of sectors : 11


----- CompareBiosVersions -----

CURRENT=010.014 FILE=0eth0 : chip revision 0403.
10.014


*******************************
* NO bios Update is necessary *
*******************************
Basic registers of MII PHY #1: 3100 786d 2000 5c21 05e1 45e1 0007 2801.
Link status: active.

Authentification lanpbx FAILED --> see /var/log/init

Loading modules - please wait ...
watchdogd now in real time mode
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp.c : 156] DSP download failed [-1]
DSP Init error -4
Unable to handle kernel NULL pointer dereference at virtual address 00000000
current->tss.cr3 = 05446000, %cr3 = 05446000
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<c88e08fc>]
EFLAGS: 00010283
eax: 00000000 ebx: c01b9000 ecx: 00000100 edx: c01b9000
esi: 00000000 edi: 00000000 ebp: c547feac esp: c547feb4
ds: 0018 es: 0018 ss: 0018
Process modprobe (pid: 582, process nr: 21, stackpage=c547f000)
Stack: c01b9000 00000000 c547fedc c88e53d5 fffffffc 00000003 c88e3059 c0114825
00000200 c01bcd35 c547feec 00000001 00000000 00000000 c547fefc c88e496a
c88e7288 c01bcd35 c547ff0c c88e6c8b 00000012 00000200 c547ff3c c88e6cf3
Call Trace: [<c88e53d5>] [<c88e3059>] [<c0114825>] [<c88e496a>] [<c88e7288>] [<c88e6c8b>] [<c88e6cf3>]
[<c88e8489>] [<c88e6cc0>] [<c88e3000>] [<c01244ea>] [<c88e3048>] [<c0116df1>] [<c880478d>] [<c88e3048>]
[<c88e0000>] [<c88e3048>] [<c01083e8>]
Code: 8b 00 85 c0 74 04 39 d0 75 f6 39 d0 0f 94 c0 25 ff 00 00 00
watchdogd now in normal mode
RTLinux System Load 1.00
INIT: Switching to runlevel: 6
INIT: Sending processes the TERM signal
Saving e-mgd configuration files ...
Saving System Clock in Hardware Clock ...
No backtrace
Sending all processes the TERM signal...
Sending all processes the KILL signal..
Unmounting file systems
Please stand by while rebooting the system...
Restarting system.
ShutOK cleared!

------------------- второй ребутт ------------------------------------
&Oacute;&#8250;Alize BIOS Monitor
*** BIOS Version 3EH30227GQAA bios100/010.014 ***
*** Generated on Mar/5/2008 at 14:05 ***
memory test started lng=133169152 with 0
running flash(soldered=1 socket=0)=1,BIOScase:4,BIOSv24:0,verrou=1,algoNOR=1,size=1,base=3FF80000
DIMM characteristics->: JEDEC Manu ID:&ecirc;,......
Memory type(EDO,FPM..):0x 4
# of row address:13
# of col address 9
# of module row 1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI:scan_bus for bus 0
PCI:bus=00h,devfn=00h ,[vendor:device]=[1022h/3000h]
PCI:bus=00h,devfn=60h ,[vendor:device]=[100Bh/0020h]
PCI:bus=00h,devfn=98h ,[vendor:device]=[1064h/2101h]
PCI:scan_buses with 00h secondary buses
PCI:command = 3FFH for device 00:00
PCI: Assigning I/O space FC00-FCFF for 00:60 BAR= 10
PCI:Assign memory space BFFFF000H to BFFFFFFFH for device 00:60
PCI:command = 3FFH for device 00:60
PCI:Assign memory space BFFFD000H to BFFFDFFFH for device 00:98
PCI: Assigning I/O space FD00-FD1F for 00:98 BAR= 14
PCI: Unable to handle I/O allocation for 00:98 (FF04) BAR= 18
PCI:command = 3FFH for device 00:98
assigning irq10 to xchange
B0 = 17
DRCTMCTL = 1E
DRCCTL = 8
DBCTL = 11
Set external RTC
Set Internal RTC
No external RTC detected
gpbus sig timing : 0-2-1-2-1-2!

CMOS is available
Xchange PCI mem base OK: 0,mbx= BFFFD000
dsp_accesses.stat_ctrl= FD00
Xchange PCI IO base OK: 0
Xchange irq OK: A
PCI command read for natsemi : 347
PCI Master Bit Setting...
pci_command set to: 357
0 80 9F 81 67 4E ,IRQ 12.on interrupt pin:2
eth0: Transceiver status 0x 7869 advertising 5E1
Flashfx version:700.014.700c
Flash 2Gbit Support activated !!
GC-forced on Soft Error activated !!
NAND Flash Comfiguration:
CPU size : 128 MBytes
free spare blocks: 38
NAND Flash Details:
chip #0 : Type=NAND01GW3B Id=20F1H Size=128(MBytes) Unit size=131072 Page Size=2048
time :sec=56,min=55,hour=16,DoW= 5,date=19,Month= 2,year= 9
time :sec=59,min=55,hour=16,DoW= 5,date=19,Month= 2,year= 9

ALIZE informations :
Memory Detected : 131072 Ko
Flash Detected
DaughterBoard Detected
DSP Voip Found : 1
XCHANGE Detected
XCHANGE Chip Initialization OK
Ethernet Found : 1
Ethernet Chip Initialization OK
Hard Disk Not Detected
PCM11 selected
CPU at 133 mhz
check lock RTC
value of DIL switch 2


YOU CAN strike Ctrl B to enter in BIOS monitor during several seconds from NOW !

BATMODE testing
Static Boot from hard disk #0(3)
unable to boot on DISK
Static Boot from No Boot Device selected(0)
Static Boot from flash NAND mother(1)

BOOT Sector Found on NAND Flash Drive #0
Shutdown of the interface 0 = 0
init ethernet interface 1 not done
Watch dog started
Linux version 2.2.18-rtl (che_int@csbu176) (gcc version 2.95.2 19991024 (release)) #1 Tue Mar 25 20:36:39 IST 2008
Calibrating delay loop... 65.74 BogoMIPS
Memory: 122804k/131072k available (644k kernel code, 408k reserved, 1584k data, 36k init)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
ShutOK cleared!
Dentry hash table entries: 16384 (order 5, 128k)
Buffer cache hash table entries: 131072 (order 7, 512k)
Page cache hash table entries: 32768 (order 5, 128k)
CPU: AMD 486 DX/4-WB stepping 04
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
TCP: Hash tables configured (ehash 131072 bhash 65536)
802.1Q VLAN Support v1.0 (c) 2000 Ben Greear (GPL)
vlan Initialization complete.
Starting kswapd v 1.5
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
RAM disk driver initialized: 16 RAM disks of 20480K size
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 36k freed
Warning: unable to open an initial console.
Initial console created for init
RTLinux Extensions Loaded (http://www.fsmlabs.com/)
Starting watchdog timer daemon using /dev/rtf3
modprobe: modprobe: Can't locate module char-major-4
INIT: version 2.78 booting
Remounting root read-write....
modprobe: modprobe: Can't locate module char-major-4
e-mgd board found - setting up ramdisk

Remount - Forces the media to be remounted
Datalight FlashFx
V4.06.500 Back ported to OmniPCX MediaGateway
Copyright (c) 1993-2005
Patent US#5860082

Disk Remounted
e2fsck 1.19, 13-Jul-2000 for EXT2 FS 0.5b, 95/08/09
/dev/fla: clean, 162/30360 files, 13758/121396 blocks
/dev/fla on /mnt/flash type ext2 (rw)
Set initial public keys
/mnt/flash/local/ifcfg-eth0: OK
Find ip configuration in /mnt/flash/local/
/mnt/flash/local/startup.cfg: OK
INIT: Entering runlevel: 3 in
Trying to map the io space of the board(=1). Wait 10 sec...
Compression daughter board type [MADA]
mada_1 DSP daughter board
e-MGD version 43.24
Media Gateway Software R8.0 loading ...

No password file found - using default password list
Duplex mode : auto-negociation
Starting /etc/rcS.d/01fifos
Starting /etc/rcS.d/05syslog
Starting /etc/rcS.d/10network
Starting /etc/rcS.d/90init

BIOS updater is now working ... getting current version information
Check if we need to update with bios 3EH30227GQAA bios100/010.014 ...

Reboot after bios update is enabled...

----- RetrieveFlashNorInfo -----
NOR VERSION : Bios Version in soldered NOR flash : 3EH30227GQAA bios100/010.014 len = 28
- Flash Nor Informations -
Flash AMD
Size : 512 Kbytes
Number of sectors : 11


----- CompareBiosVersions -----

CURRENT=010.014 FILE=0eth0 : chip revision 0403.
10.014


*******************************
* NO bios Update is necessary *
*******************************
Basic registers of MII PHY #1: 3100 786d 2000 5c21 05e1 45e1 0007 2801.
Link status: active.

Authentification lanpbx FAILED --> see /var/log/init

Loading modules - please wait ...
watchdogd now in real time mode
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp.c : 156] DSP download failed [-1]
DSP Init error -4
Unable to handle kernel NULL pointer dereference at virtual address 00000000
current->tss.cr3 = 05446000, %cr3 = 05446000
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<c88e08fc>]
EFLAGS: 00010283
eax: 00000000 ebx: c01b9000 ecx: 00000100 edx: c01b9000
esi: 00000000 edi: 00000000 ebp: c547feac esp: c547feb4
ds: 0018 es: 0018 ss: 0018
Process modprobe (pid: 582, process nr: 21, stackpage=c547f000)
Stack: c01b9000 00000000 c547fedc c88e53d5 fffffffc 00000003 c88e3059 c0114825
00000200 c01bcd35 c547feec 00000001 00000000 00000000 c547fefc c88e496a
c88e7288 c01bcd35 c547ff0c c88e6c8b 00000012 00000200 c547ff3c c88e6cf3
Call Trace: [<c88e53d5>] [<c88e3059>] [<c0114825>] [<c88e496a>] [<c88e7288>] [<c88e6c8b>] [<c88e6cf3>]
[<c88e8489>] [<c88e6cc0>] [<c88e3000>] [<c01244ea>] [<c88e3048>] [<c0116df1>] [<c880476a>] [<c88e3048>]
[<c88e0000>] [<c88e3048>] [<c01083e8>]
Code: 8b 00 85 c0 74 04 39 d0 75 f6 39 d0 0f 94 c0 25 ff 00 00 00
watchdogd now in normal mode
RTLinux System Load 1.00
INIT: Switching to runlevel: 6
INIT: Sending processes the TERM signal
Saving e-mgd configuration files ...
Saving System Clock in Hardware Clock ...
No backtrace
Sending all processes the TERM signal...
Sending all processes the KILL signal..
Unmounting file systems
Please stand by while rebooting the system...
Restarting system.
ShutOK cleared!
&Euml;&#8250;

А GD-2 не стояла в старых релизах - про проблемы с GD2 была TC 1033, доступна на сайте http://www.alcatelunleashed.com/index.php
в разделе официальных ТС



Редактировано 1 раз. Последний раз 19.02.2009 19:44 пользователем vad.

как пришла GD-2 так сразу и воткнули в ОХЕ 8.0.1
да и покупалась она совсем недавно, 2 месяца еще не прошло

TC 1033 оно самое, и что делать когда до командной строки вообще не достучаться

У вас free spare blocks: 38 , так что это не ваш случай. У вас ругается на DSP, что его совсем не видно. Может, отломан или поврежден?
Не очень давно наблюдали free spare blocks: 0 на GD-2. После заливки софта все работало, но все равно поменяли по гарантии.

Есть ещё tc0521. Вот его описание: "The purpose of this technical communication is to provide a procedure which allows to reformat and to
reload the e-MGD binaries in case of corrupted -MGD NAND Flash."
В свое время что-то похожее было, но правда с GA, и приходилось её форматировать.

пробывал откатить биос на 43.7 (bios100/010.009) в этоге все равно остается 3EH30227GQAA bios100/010.014

BIOS updater is now working ... getting current version information
Check if we need to update with bios 3EH30227GKAA bios100/010.009 ...

Reboot after bios update is enabled...

----- RetrieveFlashNorInfo -----
NOR VERSION : Bios Version in soldered NOR flash : 3EH30227GQAA bios100/010.014 len = 28
- Flash Nor Informations -
Flash AMD
Size : 512 Kbytes
Number of sectors : 11


----- CompareBiosVersions -----

CURRENT=010.014 FILE=010.009


*********************************************************************
* The Bios in Flash is newer than the one found in binaries *
* (use command 'bios_update -force' to force current bios flashing) *
*********************************************************************

хм...
от того что версия 44.8.2 (от релиза h1.301.25a) легла на GD-2 могла загнуться?
планировалось ставить релиз 9, пока его нет чтоб работал релиз 8

вам просто пишет, что залитый БИОС на плате новее, чем вы хотите ей подсунуть... проблемой быть не должно. недавно в GD (переделанной кста из процессора ОХО) бинарники лил от восьмого, вынос на основе этой GD ставился к станции с 7-м... на этом выносе трудятся 12 агентов СС (что весьма критично на предмет косяков). все работает нормально уже почти месяц

вдогонку, lanpbxbuild делали?

++++++++++++++++++
Anything's possible. Keep thinking.



Редактировано 1 раз. Последний раз 20.02.2009 03:14 пользователем whistler.

То есть, товарищ не поверил плате, что у нее проблемы с DSP (отчего она уходит в ребут), и продолжает мучить плату.
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp_download.c : 715] DSP_NOT_RESPONDING
[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp.c : 156] DSP download failed [-1]
DSP Init error -4
Unable to handle kernel NULL pointer dereference at virtual address 00000000

Вероятнее всего, требуется замена платы.

залил ОХО на GD-2, в результате понизил биос до 3EH30227GLAA bios100/010.011 с 3EH30227GQAA bios100/010.014 (на биос bios100/010.013 все также ругается "Flash 2Gbit Support activated !! GC-forced on Soft Error activated !!" ), по другому никак не получалось даже согласно TC0521 в упор не понижался биос

в этоге получилось это
-----------------------------------------------------
Flashfx version:600.010.500
NAND Flash Comfiguration:
CPU size : 128 MBytes
free spare blocks: 38
NAND Flash Details:
chip #0 : Type=NAND01GW3B Id=20F1H Size=128(MBytes) Unit size=131072 Page Size=2048
-----------------------------------------------------
вместо того что было
-----------------------------------------------------
Flashfx version:700.014.700c
Flash 2Gbit Support activated !!
GC-forced on Soft Error activated !!
NAND Flash Comfiguration:
CPU size : 128 MBytes
free spare blocks: 38
NAND Flash Details:
chip #0 : Type=NAND01GW3B Id=20F1H Size=128(MBytes) Unit size=131072 Page Size=2048
-----------------------------------------------------

[/users/sabthagi/ws/r_mg_appli_43.24/ca_dspx/code/dsp/dsp.c : 156] DSP download failed [-1]
DSP Init error -4

У меня тоже самое было. Плата работала 3 года, и померла. Никакие прошивки не помогают, да и как они помогут если проблемы с железом. Теперь функцию GD временно выполняет GA плата.

если залить ОХО то работает нормально

То есть плату в итоге реанимировать удалось?

как ОХО работает, как GD в упор не хочет