INTERSYST : OmniPCX Enterprise
Форум доступен только для чтения. Новая версия форума расположена по адресу http://www.intersyst.ru/support/forum/
Пользователь: vanna
IP-адрес скрыт
IP-адрес скрыт
Дата: 22.12.2005 15:52
E1 trunk group
Dear Sir,
I have created E1 trunk and connect it,
but when sieze trunk and dial number, the signal only go until public switch and
then diconnect.
Note: PABX OXE R 6.1.1
PCM R2 board
Public switch signal R2 Q421
Please advise
I have created E1 trunk and connect it,
but when sieze trunk and dial number, the signal only go until public switch and
then diconnect.
Note: PABX OXE R 6.1.1
PCM R2 board
Public switch signal R2 Q421
Please advise
Пользователь: vad
IP-адрес скрыт
IP-адрес скрыт
Дата: 22.12.2005 19:04
Re: E1 trunk group
In this case not so easy to help.
At first - do you have some incidents during call attempts.
And next - ask personal from public switch make trace (what wrong from PTT point of view).
At first - do you have some incidents during call attempts.
And next - ask personal from public switch make trace (what wrong from PTT point of view).
Этот форум в режиме 'только для чтения'. Новый форум расположен по адресу http://www.intersyst.ru/support/forum/